Olympus IX81 User Manual download pdf (Page 60)

Fig. 77

Fig. 78

Universal Condenser (U-UCD8) (Figs. 77 & 78)

<< Attaching onto the UCD Adapter >>

1. Using the Allen screwdriver, loosen the two setscrews 1 on the IX-ADUCD

UCD adapter. (Fig. 77)

2. Push in the U-UCD8 universal condenser horizontally into the adapter

until the condenser’s positioning pin fits into the positioning groove on

the mount dovetail.

3. Tighten the two setscrews 1 using the Allen screwdriver. (Fig. 77)

<< Attaching onto the Illumination Column >>

1. Rotate the condenser height adjustment knob 2 to raise the condenser

to the upper limit position. (Fig. 78)

2. Loosen the condenser clamping knob 3. (Fig. 78)

3. Insert the mount of the UCD adapter into the mount dovetail of the con-

denser holder (the condenser turret should be positioned on the right

hand side). Push the UCD adapter horizontally into the condenser holder

until the condenser’s positioning pin fits into the positioning groove on

the mount dovetail.

4. Tighten the condenser clamping knob 3. (Fig. 78)

<< Optical element indices >>

The optical element indices attached on the U-UCD8 are not visible

because the U-UCD8 is used upside down. Make your own reminder

such as a list of the optical elements inserted in the turret.

With the U-UCD8 (T2), however, the inserted optical elements can be

identified using the provided number stickers/indication plates.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 66 67 68

No comments

Olympus IX81 User Manual Page 60