Olympus PT-030 User Manual download pdf (Page 23)

E-22

After sealing the Case, check that the camera functions normally.

 Push the POWER button on the Case and confirm that the camera

turns ON/OFF.

 Turn the mode dial knob on the Case and confirm that the camera

mode switches properly.

 Push the shutter lever on the Case and confirm that the camera

shutter is released.

 Operate other control buttons on the Case and confirm that the

camera functions as it should.

Check the camera operation.

:•If the camera does not function properly, restart the digital

camera installation procedure from “Check the digital

camera.” on page E-18 of this manual.

• Make sure that the mode dial can be moved after the

camera has been loaded in the Case. If the mode dial

does not move, there may be oil or grease on it; wipe it

clean.

•

When the digital camera is not used for about 3 minutes

while in the shooting mode, it enters the sleep mode

(standby status) and no operations are possible. To cancel

sleep mode and return to operation status, press the zoom

lever, shutter button or any other button. For details, refer to

the digital camera's instruction manual.

CAUTION

POWER Zoom

Mode

Shutter

PT_030_EN.qxd 05.10.28 6:34 PM ページE-22

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

Olympus PT-030 User Manual Page 23