Olympus PT-030 User Manual download pdf (Page 36)

E-35

Maintenance of the threaded sections on the

TTL cable and TTL cable connector

If the threaded sections used to connect the TTL cable to the TTL

cable connector are not maintained properly, salt and other seawater

residue may adhere the TTL cable and prevent it from being

disconnected.

After use in seawater, clean off any salt, sand, or other residue as

soon as possible, then dry the equipment thoroughly. Clean the

threaded sections with a cotton swab and apply a thin, uniform layer

of O-ring silicon grease (provided with this case).

Replace consumable products.

 The O-ring is a consumable product. Independent of the number of

times the Case is used, it is recommended that the O-ring should

be replaced by a new one at least once a year.

 Deterioration of the O-ring is accelerated by the use conditions and

the storage conditions. Replace the O-ring even before a year has

passed if it shows signs of damage, cracking or loss of elasticity.

Note: •

Please use original Olympus products for the silicone O-ring

grease, the silica gel, and the O-ring. These consumable

products also can be purchased at an Olympus service

station.

Clean and apply O-ring silicon

grease to these sections.

PT_030_EN.qxd 05.10.28 6:34 PM ページE-35

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Olympus PT-030 User Manual Page 36