Olympus C-2000 Operations Instructions download pdf (Page 114)

114

HOW TO CONNECT AN EXTENSION FLASH

1 Place the flash on the mount, then plug the cord into the

camera’s Flash synchronization socket.

2 Turn on the camera and set the Mode dial to “A”. The LCD

monitor turns on automatically. (p. 68)

3 Turn on the extension flash and set it the calibration

mode. Adjust the ISO and the f-stop settings according to

the ones set with the camera. (Refer to the flash

instructions.)

4 Take a picture.

● When an extension flash is used alone, the shutter speed

will extend down to 1/2 second.

● When an extension flash is used along with the main flash,

shadows can be reduced by bouncing the extension flash

light off of the ceilings or walls.

◆ The extension flash may fire accidentally,

depending on the circumstances.

◆ The automatic exposure is calibrated for the

main flash only and may not work properly with

the extension flash.

◆ With Exposure compensation, the amount of

light can be changed for the main flash only.

◆ When shooting from a close distance, using the

extension flash is not recommended to avoid

over exposure.

◆ The Slow shutter synchronization flash mode can

be used. (p. 116)

Note:

Flash synchronization socket

Prise de synchronisation de flash

Enchufe de sincronización del flash

Aperture priority

Priorité à l’ouverture

Prioridad de abertura

Mode dial

Molette de mode

Disco de modo

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 247 248

No comments

Olympus C-2000 Operations Instructions Page 114