Olympus FL-36 User Manual download pdf (Page 12)

2322

The light intensity adjustment must be set to ON in the

custom setup operation (page 47).

• The indicator appears in the control panel.

Tu rn the select dial to choose a light intensity adjustment value.

0 → +0.3 → +0.7→ +1.0 ... +3.0

0 → –0.3 → –0.7→ –1.0 ... –3.0

2. The display shows the light intensity adjustment value ex-

cept when the value is 0. In this case, the displayed light

control range corresponds to an adjustment value of 0.

3. If the camera’s flash adjustment mode is selected, the

actual flash light intensity will be the total of the light

intensity adjustment value set on the FL-36 and that

set on the camera. The light intensity adjustment value

displayed is that of the FL-36 only.

[Example]

Light intensity adjustment

The flash light intensity can be adjusted between +3 and –3.

Light intensity adjustment value

1. The control panel shows the light control range according

to the camera setup.

2. Confirm that the distance to the subject is within the light

control range.

If not, adjust the lens iris (F) or the subject distance.

The light control range varies according to the camera type

and camera setup (ISO speed, lens iris (F) and lens focal

distance (ZOOM)).

3. When flash activation has been performed correctly, the

AUTO CHECK lamp blinks for about 5 seconds after the

shutter is released.

In this mode, pre-flash is performed to measure the optimum flash intensity and then actual flash is

performed.

Light control range

ZOOM indicator

Displayed according to the

focal length of the lens.

Selected

adjustment value

Adjustment value

displayed on FL-36

Actual light intensity

adjustment

FL-36 +0.3

+0.3 +0.6

Camera +0.3

TTL AUTO indicator

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 32 33

Comments to this Manuals

No comments

Olympus FL-36 User Manual Page 12

Comments to this Manuals

Related products and manuals for Flashlights Olympus FL-36