Olympus FL-36 User Manual download pdf (Page 18)

3534

Lens iris (F)

<AUTO>

ISO speed

In this mode, the flash light intensity is controlled automatically according to the lens iris (F) setting.

PICTURE SHOOTING USING A DIGITAL CAMERA WITHOUT COMMUNICATION CAPABILITY

1. Tu r n the electronic flash on. The batteries are recharged

when the Charge lamp lights up.

2. Press the MODE button to select the flash control mode.

• The selected mode is shown in the control panel.

• The mode is switched every time the MODE button is

pressed.

Flash light intensity is controlled

according to the light detected

through the auto light receptor of

the flash and to the lens iris (F).

AUTO

MANUAL

Usually use this mode.

Flash activation is performed

according to the manually set

guide number (GN).

Flash control

mode

Control panel

display

Control operation Main application

Ref.

Pages

Shooting using manual flash.

Memo:

By selecting an ISO speed and lens iris (F) different from those

set on the camera, the light intensity can be adjusted in 1/3 steps.

Memo: Test flash activation

Flash activation can be tested before actually releasing the shutter.

Press the Test button for test flash activation.

The light control is OK when the AUTO CHECK lamp blinks for about 5 seconds after

the test flash activation.

If the lamp does not blink, change the lens iris (F), ISO speed, subject distance, etc.

•

The light check by means of test flash activation is possible only in the AUTO mode.

AUTO indicator MZOOM indicator

1. Adjust Zoom according to the focal length of the lens.

While keeping the MODE button pressed, turn the select dial within

2 seconds to set the ISO speed.

Note: If the MODE button is kept pressed for more than 2 seconds,

the flash mode changes to the Custom Setup mode (see page 47).

Turn the select dial according to the lens iris (F).

If the camera setup (ISO speed and lens iris (F)) does not

match one of the usable ISO speed/lens iris (F) combina-

tions, the ISO and F indicators blink to alert you. In this case,

change the camera setup (ISO speed and/or lens iris (F)).

4.When flash activation has been performed correctly,

the AUTO CHECK lamp blinks for about 5 seconds

after the shutter is released.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 32 33

Comments to this Manuals

No comments

Olympus FL-36 User Manual Page 18

Comments to this Manuals

Related products and manuals for Flashlights Olympus FL-36