Olympus FL-36 User Manual download pdf (Page 24)

4746

CUSTOM SETUP

Custom setup allows each user to customize flash setup to suit his or her preferences.

Setup procedure

1. Tu rn the electronic flash on.

2. Press and hold the MODE button for more than 2 sec-

onds, until the setup mode display appears in the control

panel.

3. Press the MODE button momentarily to select the setup

mode.

4. TTurn the select dial to select the value.

5. Keep the MODE button pressed for more than 2 seconds

to exit from setup and return to the previous control panel

display.

3. Background screen sync

Slow shutter is used and the flash is emitted immediately

before the end of exposure period.

This makes it possible to take pictures of moving objects

such as car taillights with a streaming effect.

When the camera in use has a built-in flash, it can be used

simultaneously with the electronic flash.

•

Advanced shooting techniques are possible. For example, you

can bounce the light from the electronic flash off the wall or ceil-

ing while using the camera’s built-in flash for a catch-light effect.

• With certain camera models, the built-in flash may be disabled

when the electronic flash is mounted on the camera’s hot shoe.

4. Combination with camera’s built-in flash

Note

The electronic flash control mode should be set to TTL AUTO or

FP TTL AUTO.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 32 33

No comments

Olympus FL-36 User Manual Page 24