52
EN
2
Exposure
The camera automatically shoots a number of pictures at different exposure values for each
frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit subject
or a scene at dusk), you can pick the picture you prefer from a selected number of frames with
a variety of different exposure settings (exposure and compensation values). The pictures are
taken in the following order: Picture with optimum exposure, picture adjusted in – direction, and
picture adjusted in + direction.
Compensation value: 0.3, 0.7 or 1.0
•
The compensation value will change if the EV step is changed.
g
“EV STEP” (P. 105)
Number of frames: 3
Start shooting.
•
In single-frame shooting, the exposure changes every time
the shutter button is pressed.
•
In sequential shooting, hold down the shutter button until
the selected number of frames are taken.
•
Releasing the shutter button stops flash bracketing
shooting. When it stops,
0
is displayed in green on the
LCD monitor.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P
mode : Aperture value and shutter speed
A
mode : Shutter speed
S
mode : Aperture value
M
mode : Shutter speed
To apply AE bracketing to the exposure value you have compensated:
j
Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
AE bracketing
Menu
MENU
[
c
]
[
V
]
[BRACKETING]
[AE BKT]
TIPS
e.g.) When BKT is set to
[3F 1.0EV]
–1.0 EV +1.0 EV±0
AE BKT
WB BKT
ISO BKT
FL BKT
BRACKETING
SET
BACK
AE BKT
3F 0.7EV
3F 0.3EV
3F 1.0EV
OFF
E-P1_MASTER.fm Seite 52 Montag, 8. Juni 2009 1:15 13
Comments to this Manuals