Olympus IX81 User Manual download pdf (Page 34)

With the IX-ULWCD Condenser

(Note) The IX-PHCU or IX-PH1U can be attached only in the Ph1 and PhC positions.

Do not remove the built-in elements.

Optical Element Indication Applicable Objectives

PHL (Built in) PhL UPlanFl4XPh

IX-PHCU Ph1 CPlan10XPh, LCAch20XPh, CPlanFl10XPh

IX-PH1U PhC UPlanFl10XPh, UPlanFl20XPh, LCPlanFl20XPh, UPlanApo10XPh

PH2 (Built in) Ph2 UPlanFl40XPh, LCPlanFl40XPh, LCPlanFl60XPh, UPlanApo20XPh, LCAch40XPh,

LUCPlanFl40XPh, SLCPlanFl40XPh

With the U-UCD8 Universal Condenser & IX2-MLWCD Condenser

}Refer to the provided instruction manual.

UIS2 Series

Optical Element Indication Applicable Objectives

PHL (Built in) PhL UPlanFLN4XPh

IX-PHCU Ph1 CPlanN10XPh, LCAchN20XPh, CPlanFLN10XPh

IX-PH1U PhC UPlanFLN10X2Ph, UPlanFLN20XPh, LUCPlanFLN20XPh

PH2 (Built in) Ph2 UPlanFLN40XPh, LUCPlanFLN40XPh, LUCPlanFLN60XPh,

LCAchN40XPh, UPlanFLN60XOIPh

UIS Series

Fig. 36

Fig. 37

}For the U-UCD8, refer to the separate instruction manual.

}Do not engage any optical element in the BF (brightfield) light path.

1. Place the condenser in the orientation as shown in Fig. 36, loosen the

detaching screws 1 and remove the cover 2.

With the IX2-LWUCDA2 motorized condenser, remove the four clamping

screws 3 using the Allen screwdriver and remove the top cover. (Fig. 37)

2. Rotate the turret so that the number of the next optical element to be

inserted in the uncovered position is visible. (When the IX2-LWUCDA2 is

used, turret rotation is motorized.)

3. Loosen the optical element position centering screws using the optical

element centering knobs 4. (Figs. 36 & 37)

Attaching the Phase Contrast

Optical Elements

(Figs. 36 to 40)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 67 68

No comments

Olympus IX81 User Manual Page 34