Olympus V326110SU000 User Manual download pdf (Page 20)

20 EN

ShootingShooting

According to the ﬂ ash mode setting of the camera, shooting in TTL-AUTO mode or MANUAL

mode is available with this ﬂ ash.

RC switch

Set the RC switch to “OFF”.

In accordance with the intended use, set the ﬂ ash mode

of the camera.

For details, refer to the instruction manual of the camera.

MANUAL mode is not available for some cameras.

In TTL-AUTO mode: When ﬂ ash activation has been performed correctly, the AUTO

CHECK lamp blinks for about 5 seconds after the shooting.

In MANUAL mode: Adjust camera settings (ISO sensitivity and aperture value) based on the

distance to subject and then shoot.

Shooting distance (m) = Guide No. (ISO100) x ISO sensitivity coefﬁ cient ÷ Aperture value

Available shooting range (Table P.4)

ISO sensitivity coefﬁ cient

ISO

sensitivity

25 50 100 200 400 800 1600 3200 6400

Coefﬁ cient

0.5 0.71 1.0 1.4 2.0 2.8 4.0 5.6 8.0

When using a ﬂ ash, ﬂ ash light may be blocked by the lens body, lens hood, etc.

When the shooting distance is closer to 1m, using the wide panel is recommended not to control the ﬂ ash volume too much.

•

book_R2190_JUGC.indb 20book_R2190_JUGC.indb 20 2011/03/21 11:15:372011/03/21 11:15:37

1 ... 19 20 21 ... 86

No comments

Olympus V326110SU000 User Manual Page 20