Olympus IX81 User Manual download pdf (Page 58)

Fig. 70

Fig. 71

Fig. 72

Fig. 73

<< Attaching the Scales >>

}Scales for use with a 96-well microtiter plate are provided with the me-

chanical stage.

1. Loosen the two clamping knobs 6 at the top of the stage’s X-axis guide.

Positioning the scale numerals correctly, plate the X-axis scale 7 on the

guide. Then tighten the clamping knobs. (Fig. 70)

2. Positioning the scale numerals correctly, plate the Y-axis scale 8 on the top

of the stage’s Y-axis guide. The scale will be held in place magnetically.

(Fig. 70)

<< Attaching the CK2-SS Substages >>

· These plates can be attached in the same way as outlined in Mechanical

Stage (IX-MVR) above.

}When the mechanical stage is not used, stage extender plates 9 can be

attached at both sides of the plain stage. (Fig. 71)

Stage (IX2-SFR) (Figs. 72 & 73)

1. Insert the stalk 2 of the flexible X-axis/Y-axis knobs into the U-shaped

notch on the positioning bracket @.

2. Using the Allen screwdriver, tighten the clamping screw 3 of the bracket

lightly to the stage.

3. Align the stage’s center alignment index line 4 with the edge 5 of the

upper stage. (Fig. 73)

4. Slide the positioning bracket to and fro in order to determine the most

convenient stalk angle.

5. Tighten the bracket’s clamping screw firmly.

Mechanical Stage (IX-MVR)

· This is attached in the same manner as outlined in Stage (IX2-SFR))

above. The mechanical stage, however, is not provided with a stage center

alignment index line. Instead, r

otate the Y-axis knob until the position D or

E on the Y-axis scale is reached to bring the stage into the center.

<< Attaching the Positioning Bracket >>

}A flexible stalk for the coaxial X-axis and Y-axis knobs is employed with the

IX2-SFR stage and IX-MVR mechanical stage. These stages are provided

with a positioning bracket that allows the tilt of the stalk to be adjusted to

suit the observer’s preference.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 67 68

No comments

Olympus IX81 User Manual Page 58