34
EN
• When [Remote Flash] (P. 46) is set to [Off], [#RC] and [#SLV] cannot be
selected.
• Some items are not available in some shooting modes.
Single/Sequential
1
Press the jY button to display the direct menu.
2
Select an option using HI (arrow pad) and press A.
o
Single-frame shooting
Shoots 1 frame at a time when the
shutter button is pressed (normal
shooting mode).
Sequential 1 *
1
The images are taken sequentially for
200 frames at up to about 2.5 frames
per second (fps) while pressing down
the shutter button all the way down.
Sequential 2 *
1
The images are taken sequentially for
up to 7 frames at about 7 frames per
second (fps) while pressing down the
shutter button all the way down.
c
High-Speed1 *
1, 2
The images are taken sequentially for
up to 60 frames at about 20 frames per
second (fps) while pressing down the
shutter button all the way down.
d
High-Speed2 *
1, 2
The images are taken sequentially for
up to 60 frames at up to 60 frames per
second (fps) while pressing down the
shutter button all the way down.
*1 Taken pictures are displayed as a group.
*2 The number of recording pixels are limited.
• During sequential shooting, focus, exposure, and white balance are locked at
the first frame.
All information about the vertical/horizontal orientation, and GPS information
are the same as the first frame.
• During sequential shooting, if the battery check blinks due to low battery, the
camera stops shooting and starts saving the pictures you have taken on the
card. The camera may not save all of the pictures depending on how much
battery power remains.
Comments to this Manuals