Olympus TG-860 Instruction Manual download pdf (Page 89)

Usage Tips

If the camera does not work as intended, or if an error message is displayed on

the screen, and you are unsure of what to do, refer to the information below to fix

the problem(s).

Troubleshooting

 Battery

The camera does not work even when batteries are installed.

• Insert recharged batteries in the correct direction. g “Inserting and

removing the battery and card” (P. 5)

• Battery performance may have been reduced temporarily due to low

temperature. Take the batteries out of the camera, and warm them by putting

them in your pocket for a while.

 Card

An error message is displayed.

• g “Error message” (P. 91)

 Shutter button

No picture is taken when the shutter button is pressed.

• Cancel sleep mode.

To save battery power, the camera automatically goes into sleep mode and

the monitor turns off if there is no operation for 3 minutes when the camera

is turned on. No picture is taken even if the shutter button is fully pressed in

this mode. Operate the zoom lever or other buttons to restore the camera

from sleep mode before taking a picture. If the camera is left for another

12 minutes, it automatically turns off. Press the n button to turn the

camera on.

• Press the q button to switch to the shooting mode.

• Wait until #(flash charge) stops blinking before taking pictures.

• With prolonged camera use, the internal temperature may increase, resulting

in automatic shutdown. If this occurs, wait until the camera has sufficiently

cooled.

The camera’s external temperature may also increase during use, however

this is normal and does not indicate malfunction.

1 ... 88 89 90 ... 124

No comments

Olympus TG-860 Instruction Manual Page 89