Olympus VN-6500 User Manual download pdf (Page 4)

3 Press the

PLAY

(`) button.

• The “Hour” indicator flashes.

4 Press the

–

button to set the

“

Hour

”.

5 Press the

PLAY

(`) or 9 button

to accept the “

Minute

”.

• The “Minute” indicator flashes.

• Pressing the 0 button enables

the “Hour” setting again.

6 Press the

–

button to set the

“

Minute

”.

• Repeat steps 5 and 6 to continue

to set the “Year”, “Month” and

“Date” in the same way.

7 After setting the “

Date

”, press the

PLAY

(`)

or 9 button.

• This completes the time and date

setup procedure.

Notes:

• You can switch the time indication

between the 12-hour system and

the 24-hour system by pressing the

DISP/MENU button while you are

setting the hour or minute.

• You can change the order of the

date indication by pressing the

DISP/MENU button while you are

setting the year, month, or day.

Example: July 14, 2010

Recording (Fig. 6)

1 Press the

FOLDER

INDEX

button to

select the desired folder.

2 Press the

REC

(s) button to start

recording.

• The record/play indicator light

turns red, and recording starts.

3 Press the

STOP

(4) button to stop

recording.

• New recordings are saved as the

last file in the folder.

1 Current microphone sensitivity

2 Current folder

3 Current recording mode

4 Current file number

5 Recording level meter

6 Recording time

7 Remaining recording time

To Pause Recording (Fig. 7)

To Pause:

While the recorder is during recording mode,

press the

REC

(s) button.

• [PAUSE] appears on the display

and the record/play indicator light

 ashes.

To Resume Recording:

Press the

REC

(s) button again.

• Recording will resume at the point

of interruption.

Notes for Recording

• If [FULL] appears on the display, you

cannot record in the selected folder. In

such a case, erase unnecessary  les.

• If the recorder is placed directly on

a table when recording a meeting, it

tends to pick up table vibrations. Put

a notebook or other item between

the table and the recorder so that the

vibration is not easily transmitted for

clearer recording.

• Even if you press the DISP/MENU

button, the display will not change

to current recording time if the

remaining recording time is 5

minutes or less.

• When remaining recording time is

less than 60 seconds, the record/

play indicator light starts  ashing

in red. When the recording time is

decreased to 30 or 10 seconds, the

light  ashes faster.

• The recorder will enter Stop mode

if it has been left paused for 60

minutes or longer.

• I n cas e o f di cult acoustic conditions

or low speaker’s voice, recording

in [HQ] is recommended. Also,

usage of an external microphone

(sold separately) could improve the

quality of recordings.

Recording from external

Microphone or other Devices

The external microphone and other

devices can be connected and the

sound can be recorded.

• When using an external microphone,

select adequate microphone, such

as a Noise-Cancellation microphone

or Electret condenser microphone

(optional).

• To connect the recorder to an

external device, use the connecting

cord KA333 (optional), and the

stereo/monaural converting plug

adapter supplied with KA333.

• The input level cannot be adjusted

on this recorder. When you connect

the recorder to an external device,

execute a test recording and adjust

the output level of the external

device.

1 A audio input terminal of other

devices (Fig. 8)

2 Converting plug adapter of

KA333 (Fig. 8)

LCD Display Information

You can select an option for the display

of the recorder. This will help review

and confirm different recorder settings

and file information.

Operation Display

While the recorder

is during

stop

mode, press and

hold the STOP (4 )

button

The total number of

files recorded in the

folder and remaining

recording time appears

on the display

While the

recorder is during

recording mode,

press the DISP/

MENU button

The display switches

between current

recording time and

remaining recording

time

While the recorder

is during stop

mode or playback

mode, press the

DISP/MENU

button

Playing time ➔

Remaining playing time

➔ Recording date of the

file ➔ Recording time

of the file ➔ Playing

time …

Note:

• In LP mode, if the remaining time

is over 1000 hours, the time will be

displayed as 999h 59m 59s.

Playback (Fig. 9)

1 Press the

FOLDER

INDEX

button to

select the desired folder.

2 Press the 9 or 0 button to

select the file to playback.

3 Press the

PLAY

(`) button to start

playback.

• The record/play indicator light

turns green, and the elapsed

playing time is indicated on the

display.

4 Press the + or –

button to select the

proper sound volume.

• The display shows the volume

level. You can choose between

[00] to [30].

1 Current folder

2 Current file number

3 Playing time

1 2 3 4 5 ... 165

Olympus VN-6500 User Manual Page 4

Comments to this Manuals

Olympus VN-6500 User Manual Page 4

Comments to this Manuals

Related products and manuals for Unknown Olympus VN-6500