Olympus E-520 User Manual Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
77
EN
7
Flash shooting
3 Set RC mode on the camera to [ON].
MENU[X][#RC MODE][ON]
The super control panel switches to RC mode.
You can press the INFO button to switch the super control panel display.
4 Use the super control panel to set the flash mode and other settings for each
group.
5 Select a flash mode.
Red-eye reduction flash is not possible in RC mode.
6 Press the # button to raise the built-in flash.
7 After shooting preparations are completed, take some test shots to check the
flash operation and images.
8 Begin shooting while checking the charging completed indications of the camera
and flash.
x Notes
Although there is no limit to the number of wireless flashes you can use, it is recommended
that each group have no more than three flashes to prevent flash malfunction due to mutual
interference.
In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be
used for flash shooting in this mode.
For 2nd curtain synchronization, set the shutter speed and anti-shock settings to within 4
seconds. Wireless flash shooting may not operate properly when using a slower shutter
speed or anti-shock setting.
2
LOM
TTL
1 / 8
+1.0
OFF
2008. 08.16
RC
Flash control
mode
Group
Select the flash
control mode and
adjust the flash
intensity individually
for groups A, B, and
C. For MANUAL,
select the flash
intensity.
Flash intensity value
Communication light level
Set the communication light level
to [HI], [MID], or [LO].
Channel
Set the communication channel to
the same channel used on the
flash.
Normal flash/Super FP flash
Switch between normal flash and
Super FP flash.
Flash
intensity
s0018_e_00_0_unified.book Page 77 Tuesday, March 18, 2008 4:08 PM
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 147 148

Comments to this Manuals

No comments