Olympus E-520 User Manual Page 88

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 87
88
EN
Playback functions
8
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
x Notes
When you perform all-frame or selected frame erase on images recorded using RAW+JPEG,
both the RAW and JPEG images are erased. When using single-frame erase, you can select
whether to erase the JPEG, RAW, or both RAW and JPEG images. g“RAW+JPEG
ERASE” (P. 97)
Protected images cannot be erased. Cancel protected images, then erase them.
Once erased, images cannot be restored. g“Protecting images” (P. 87)
Single-frame erase
1 Play back the image you want to erase and press
the S button.
2 Use ac to select [YES], then press the i
button.
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or
index display.
1 Display the images you want to erase and press the i button.
The selected images will be shown with red frames.
To cancel your selection, press the i button again.
During index display, press p to select the images you want to erase and press the i
button.
2 Press p to display the next images you want to erase and press the i button.
3 After you have selected the images to erase, press the S button.
4 Use ac to select [YES], then press the i button.
All-frame erase
1 MENU[W][CARD SETUP]
2 Use ac to select [ALL ERASE], then press the i button.
3 Use ac to select [YES], then press the i button.
All frames will be erased.
To erase immediately:
j If you have set “QUICK ERASE” (gP. 96) to [ON], pressing the S button will erase an image
immediately.
j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 97)
Erasing images
TIPS
S button
s0018_e_00_0_unified.book Page 88 Tuesday, March 18, 2008 4:08 PM
Page view 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 147 148

Comments to this Manuals

No comments