Olympus E-520 User Manual download pdf (Page 91)

Customizing your camera

Basic operations

[mode1] For determining the metered exposure while focusing. AE lock is activated while

pressing the AEL/AFL button, allowing you to adjust the focus and determine

the exposure separately.

[mode2] For determining the exposure when you press the shutter button fully. This is

useful for shooting scenes with significant changes in lighting, such as on a

stage.

[mode3] For focusing with the AEL/AFL button instead of the shutter button.

[mode4] Press the AEL/AFL button to focus, and press the shutter button fully to

determine the exposure.

AEL/AFL MEMO

You can lock and maintain the exposure by pressing the AEL/AFL button.

[ON] Press the AEL/AFL button to lock and maintain the exposure. Press again to

cancel the maintaining of the exposure.

[OFF] The exposure will be locked only while the AEL/AFL button is pressed.

; FUNCTION

You can assign a function to the < button.

[Fn FACE DETECT]

Press the < button to set [g FACE DETECT] to [ON] and activate the optimal

settings. Press again to set it to [OFF].

g“Using the face detection function” (P. 39), “g FACE DETECT” (P. 94)

[PREVIEW]/[LIVE PREVIEW] (electronic)

While holding down the < button, you can use the preview function.

g“Preview function” (P. 47)

[V]

Press the < button to acquire the WB value.

g“Setting the one-touch white balance” (P. 66)

[P HOME]

Press the < button to switch to the registered AF home position. Press again to

return to the original position. If you turn off the camera while it is set to the AF home

position, the original position will not be stored.

g“Registering the AF target position” (P. 55)

[MF]

Press the < button to switch AF mode to [MF]. Press the button again to switch to

the original AF mode. If you turn off the camera while it is set to [MF], the original AF

mode will not be stored.

[RAWK]

Press the < button to switch from JPEG to RAW+JPEG or from RAW+JPEG to

JPEG for the record mode.

You can change the record mode by turning the control dial while holding down the

< button.

[TEST PICTURE]

Pressing the shutter button while pressing the < button enables you to check the

picture you have just taken on the monitor without having to record the picture to the

card. This is useful when you want to see how a picture turned out without saving it.

[MY MODE]

While holding down the < button, you can take pictures using the camera settings

registered in the [MY MODE SETUP].

g“MY MODE SETUP” (P. 92)

[OFF]

Does not allow function allocation.

s0018_e_00_0_unified.book Page 91 Tuesday, March 18, 2008 4:08 PM

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 147 148

Comments to this Manuals

No comments

Olympus E-520 User Manual Page 91

Comments to this Manuals

Related products and manuals for Cameras Olympus E-520