Olympus PT-043 User Manual download pdf (Page 43)

EN 5

Setting the underwater shooting scene mode

zThe µ 1030 SW/Stylus 1030 SW cameras incorporate several shooting

scene modes for underwater shooting, including wide-angle and macro

modes. Simply select the mode that’s most appropriate for the scene

you are shooting.

For details, see “5. Underwater Shooting According to the Scene

Type” (P.24) of this manual.

zFor details on mode setting, refer to the digital camera’s operation

manual.

For Prevention of Water Leakage Accidents

When water leakage occurs while this product is being used, repair of the

camera housed in this product may become impossible. Please observe

the following cautions for use.

1 When sealing this product, make sure that no hairs, fibers, sand

particles or other foreign matter stick not only to the O-ring, but also to

the contact surface (front cover). Even a single hair or a single grain of

sand may cause water leakage. Please check with special care.

2 The O-ring is a consumable part. Please replace it at least once a year

with a new one. Before each use, perform the proper maintenance.

3 Deterioration of the O-ring will acelerate according to the use

conditions and the storage conditions. Immediately replace the O-ring

with a new one if it is damaged, cracked, or has lost its elasticity.

4 During O-ring maintenance, clean the inside of the O-ring groove and

confirm the absence of dirt, dust, sand, and other foreign matter.

5 Apply the specified silicone grease to the O-ring.

Examples of foreign matter sticking to the O-ring

Hair Fibers Grains of sand

PT-043_EN.book Page 5 Friday, December 7, 2007 5:30 PM

1 ... 42 43 44 ... 268

No comments

Olympus PT-043 User Manual Page 43