Olympus PT-043 User Manual download pdf (Page 56)

EN 18

Make sure the camera is loaded properly.

Check the following points before sealing the Case.

• Is the digital camera loaded properly?

• Is silica gel inserted all the way at the specified location?

• Is the O-ring attached properly to the opening on the Case?

• Is there any dirt or foreign matter on the O-ring or the O-ring contact

surface on the front lid?

• Is the waterproof function maintenance performed?

Insertion of silica gel

Before sealing the Case, insert the

silica gel bag provided for

prevention of fogging between the

bottom of the camera and the Case.

CAUTION:

• Insert the silica gel all the way at the specified location and with the

specified orientation. When the orientation is not correct, the silica gel bag

will be caught when the Case is sealed and water leakage will occur.

• If the Case is sealed without inserting the silica gel fully, the silica gel bag

will be caught by the O-ring and water leakage will occur.

• Once silica gel has been used, the moisture absorption performance will

be impaired. Always replace the silica gel when the Case is opened and

closed.

Pay attention to the orientation

PT-043_EN.book Page 18 Friday, December 7, 2007 5:30 PM

1 ... 55 56 57 ... 268

No comments

Olympus PT-043 User Manual Page 56