Olympus PT-E02 User Manual download pdf (Page 62)

E-21

(3) Place the camera table with the attached digital

camera on the camera table base in the Case.

Do not load the combination by force, but load it

gently so that the digital camera does not

interfere with parts inside the Case.

After loading the digital camera, connect the hot

shoe cable to the camera’s hot shoe.

Once the digital camera is fully inserted, turn

the lock lever on the camera table to lock it.

Gently push the Case’s mode dial down and confirm that the zoom dial can smoothly

control zooming, the power switch lever can turn the digital camera ON/OFF, and that

the mode dial can control the mode dial of the camera.

:•

Read the Waterproof Port’s instruction manual carefully to ensure that you

correctly attach the zoom gear to the lens’s zoom ring before loading the

digital camera. Make sure the zoom ring is positioned correctly during loading.

• If the zoom gear on the lens is not engaged properly with the gear on

Case’s zoom dial, zooming cannot be controlled. Even when the gears are

meshed properly, the lens zooming range may be restricted by the way the

digital camera has been loaded. Read the Waterproof Port’s instruction

manual carefully and set the zoom gear appropriately.

• When the focusing gear is attached to the lens, also confirm the gear mesh

condition.

CAUTION

1 ... 61 62 63 ... 284

No comments

Olympus PT-E02 User Manual Page 62