Olympus PT-E02 User Manual download pdf (Page 76)

E-35

(4) Sand, fibers, hair or other foreign matter on the O-ring

(5) When foreign matter (sand, fiber, hair, etc.) is stuck to the O-ring grooves or O-ring

contact surfaces.

(6) Catching of the strap, the bag of silica gel, etc. at the time of sealing the Case.

(7) Throwing the Case from a boat into the water, jumping with the Case into the water, or

other sudden application of strong forces onto the Case. When entering the water,

hand the Case over quietly or avoid impacts in other ways.

Q9: What are the important points for O-ring maintenance?

A9: Please observe the following items.

(1) Never use alcohol, thinner, benzene or similar organic solvents or chemical detergents

to clean the O-ring. When such chemicals are used, it is to be feared that the O-ring

will be damaged or that its deterioration will be accelerated.

(2) Always use genuine Olympus Grease for Silicone O-Ring (white cap). Other grease

may not be suitable for the silicone O-rings on the Case. Using the wrong grease may

result in deterioration of the Case’s surface finish and interfere with the waterproof

capability.

(3) In order to avoid deformation of the O-ring when the Case is not used for a long time,

remove the O-ring from the Case, apply a thin coat of the special grease, and store

the O-ring in a clean plastic bag. For reuse, confirm that the O-ring is free of damage

and cracks, that it has sufficient elasticity, that the surface is free of stickiness and

other abnormalities, and use it after applying a thin coat of the special grease.

Excessive application of grease does not improve the waterproof function or the

permissible withstand pressure. However, it may facilitate attachment of sand, dirt, etc.

A thin, uniform coat produces the best result.

(4) When using an external flash, check that the hot shoe cable is connected to the digital

camera.

(5) The O-ring is a consumable product. Replace it at least once a year.

(6) Deterioration of the O-ring is accelerated by the use conditions and the storage

conditions. Replace the O-ring immediately by a new one if it shows signs of damage,

cracking or loss of elasticity.

:What are the important points for Case maintenance?

:Please observe the following items.

(1) Never use the following chemicals for cleaning, corrosion protection, defogging, repair

or other purposes.

• Never use alcohol, thinner, benzene or similar volatile organic solvents or chemical

detergents to clean the Case. Pure water or lukewarm water is sufficient for cleaning.

• Do not use anticorrosion agents on the metal parts. The metal parts are made of

aluminum, brass or stainless steel. Cleaning with pure water is sufficient.

• Do not use commercial defogging agents. Always use the original Olympus defogging

silica gel.

• Do not use adhesive for repairs or other purposes. When repair is required, please

contact a service station of our company or your dealer.

:Please tell me about repairs.

: Please contact a service station of our company or your dealer, if repair should be

necessary. Do not try to repair, disassemble or modify the Case yourself. Repair,

disassembly or modification by you or third parties not authorized by Olympus

invalidates the guarantee.

1 ... 75 76 77 ... 284

Comments to this Manuals

No comments

Olympus PT-E02 User Manual Page 76

Comments to this Manuals

Related products and manuals for Unknown Olympus PT-E02