Olympus VT1621-01 User Manual download pdf (Page 117)

115

Point the remote unit at the front of

the camera and press the transmit

button on the remote unit.

The remote control receiver on the front of

the camera blinks for 2 seconds and then

the shutter releases.

To take more pictures, just press the

transmit button on the remote unit.

After pressing remote transmit button shutter did not release?

• Remote batteries low?

The remote batteries have a service life of about 5 years, although this could be shorter

depending on how and where the remote is used.

• Are you using the remote within its working range?

• Is strong light striking the remote control receiver/self-timer lamp on the front of

the camera?

• Remote channel correct?

For details, refer to the remote unit instructions.

To take a picture with the shutter button

You can take a picture by pressing the shutter button even with the remote control mark displayed

in the control panel.

Remote mode focusing

There may be occasions when you need know whether or not the shutter has released with the

remote under bright light conditions. In such a case, raise the built-in flash, select fill-in flash for the

flash control setting, and fire the flash to take the picture.

To cancel remote mode

Press and hold down the driver button , and then turn the main dial or sub dial to switch off the

remote control mark by selecting any other setting. You can also cancel the remote control mode

by just switching the camera off and on again.

Warning

Store the remote unit in a safe location away from small children. If a child accidentally swallows the

remote unit, seek medial assistance immediately. Never attempt to disassemble the remote, subject

it to heat, or attempt to incinerate it.

Remote control

receiver/self-timer

lamp

1 ... 116 117 118 ... 202

No comments

Olympus VT1621-01 User Manual Page 117