191
Glossary of Selected Terms
A mode
Denotes
Aperture priority mode
. In the A mode you choose the aperture for the effect you want to create in the
picture, and the camera selects the shutter speed.
AC adapter
The alternate power source for the camera. Connect the AC adapter to the DC IN jack on the camera, and then
plug the adapter into a common household wall outlet. When you use the AC adapter, the camera does not use
battery power. Use the AC adapter whenever possible to save the batteries.
AE
Denotes
Automatic Exposure
. The built-in exposure meter automatically sets the exposure. This camera has three
automatic exposure modes: (1) P mode determines both aperture value and shutter speed, (2) A mode
determines shutter speed automatically based on the aperture value you select manually, (3) S mode determines
the aperture value based on the shutter speed you select manually. When you use the M mode, you set both the
aperture value and the shutter speed manually and the automatic exposure feature is not used.
AF target mark
The AF target mark operates and allows autofocusing to operate correctly even in darkness.
aperture
The adjustable opening behind the lens which controls the amount of light that enters the camera. The larger the
aperture, the shorter the depth of field and the fuzzier the background. The smaller the aperture, the greater the
depth of field and the sharper the background. Aperture is measured in f/stops. Larger aperture values indicate
smaller apertures, smaller aperture values indicate larger apertures.
autofocus
With automatic focusing, you can concentrate more on the framing and composition of the picture. Half-press the
shutter button to engage autofocus and keep your finger on the shutter button. After the subject is sharp, wait for
the expression or action you want, and then full-press the shutter button to take the picture. The AF target mark is
in the center of the viewfinder, so autofocusing may not be possible with an off-center subject. In this case, cover
the subject with the AF target mark in the viewfinder and half-press the shutter button. With the shutter button still
half-pressed, move the camera and compose the picture in the viewfinder. Then, full-press the shutter button.
bracketing
A technique commonly used to explore more than one possible exposure to ensure achieving the desired effect. In
order to bracket, you can manually (1) vary the f/stop from the one indicated, (2) vary shutter speed at the same
f/stop (3) change the ISO setting or (4) You can set this camera for automatic bracketing. Using automatic
bracketing, the camera will take several exposures while automatically varying the exposure plus and minus.
CAMEDIA Master
A software application provided for downloading images from the camera to a computer. Other useful features are
provided for viewing and enhancing images.
CCD (Charge-coupled device)
A solid-state array of picture elements. The camera lens focuses incoming light onto the CCD, and the CCD
converts the light quantity at each pixel into a corresponding electronic signal.
center weighted averaging metering
A light metering mode or technique that uses an average of the center and periphery of the image area but is
biased toward the information at the center of the image area. This method is best used when the brightness of
the center and periphery of the image area does not vary greatly. See also
digital ESP metering
and
spot
metering
.
close-up
Taking pictures with the camera very close to the subject. With this camera you can take pictures within the range
20~60 cm (8 inches~23.5 inches) in the macro mode. When shooting close-ups with long exposures, make sure
that the subject is still and that the camera is steady to avoid camera shake.
Comments to this Manuals