Olympus VT1621-01 User Manual download pdf (Page 171)

169

12

1

If you are using an IBM compatible

PC/AT without Windows 2000

installed, you must first install the

USB driver.

For more details about how to install the

USB driver, refer to the instructions that

you received with the CAMEDIA Master.

2

Select the memory card that holds

the images you want to read with

the computer. (➞ 121)

Note that you cannot change the card

selection once the camera is connected

the computer. If you wish to change the

card selection, you must first disconnect

the USB cable. (➞ 171)

3

Open the connector cover on the

camera.

4

Connect the B connector of the

USB cable (the large connector) to

the camera connection point.

5

Connect the A connector of the

USB cable (the flat connector) to

the computer.

Note

• If your computer has two USB ports, you can

use either port.

6

Set the mode dial to (setup/

connection mode).

Note

• The computer recognizes the card selected in

the camera as an external disk drive. Normally,

the device is displayed as a “Removable Disk”.

The images on the card can be handled as

files with Windows Explorer.

While copying or moving image files, never

disconnect the USB cable from the camera or

computer.

Switching the card

After changing the card inserted in the camera,

make sure that the drive that names the card

displays the correct information. To confirm that

the display is correct, in Windows Explorer from

the View menu select Refresh.

3

4

5

A

B

ON

OFF

6

To the USB port

of the computer

1 ... 170 171 172 ... 202

Comments to this Manuals

No comments