Olympus VT1621-01 User Manual download pdf (Page 10)

8

• When using the camera on battery power at

low temperatures, try to keep the camera and

extra batteries as warm as possible. Batteries

which run down at low temperatures may be

restored after they are warmed at ambient

temperature.

• Perspiration or oil from your hands on the

battery contacts could prevent them from

operating. Before loading batteries, wipe the

terminals with a dry, clean cloth.

• Before going on a long trip, especially before

traveling abroad, purchase an ample supply

of extra batteries. The recommended batteries

may be difficult to obtain while traveling.

• Always recharge Ni-MH or Ni-Cd batteries

with a charger recommended for use with

these batteries.

• Before using Ni-MH or Ni-Cd batteries, always

read the instructions provided with purchase

of these batteries.

• To avoid personal injury or damage to the

camera, always inspect batteries before

loading. If you notice leaking, damage to the

battery cover or insulation, discoloration,

warping or any other abnormality do not use

the batteries.

• Recommended temperature ranges for Ni-MH

batteries:

Operation 32°~104°F

Charge 32°~104°F

Storage −4°~86°F

• Using, charging, or storing the batteries

outside these ranges could shorten battery

life or affect battery performance. Always

unload the batteries from the camera before

storing the camera and batteries for a long

period.

• Alkaline battery performance is limited by a

number of factors: manufacturer, date of

manufacture, warranty period, low

temperatures. Battery service could be

shortened by any of these factors. Generally

alkaline batteries perform poorly at low

temperature.

• Ni-MH batteries are rechargeable but

chemical reactions could cause the battery

capacity to deteriorate. The batteries can be

recharged up to approximately 300 times,

depending on operating conditions.

IMPORTANT SAFETY INSTRUCTlONS (continued)

• If you use Ni-Cd batteries, make sure that you

always fully charge 4 batteries at a time on a

recharge unit rated for use with Ni-Cd

batteries. If you do not use Ni-MH batteries

for about 1 month, you may not be able to

restore them to full power with one full

recharge. You may need to recharge them

several times to restore them to full power.

Monitor and control panel light

• The fluorescent lamp of the monitor and

control panel has a long but limited service

life. If either display becomes dark or begins

to flicker, contact an Olympus authorized

service center.

• At low temperatures, the light could be slow

to light and the color could be different. When

using the camera in cold weather, try to keep

it as warm as possible. If you notice changes,

normal operation will be restored after the

camera is returned to a warm location.

• The monitor of this camera is a high precision

device. However, you may occasionally notice

residual display of frequently displayed

images, and the color and brightness of the

display could change with the angle of view.

These phenomena do not indicate problems,

but could occur with normal operation of the

monitor.

1 ... 9 10 11 ... 202

Comments to this Manuals

No comments