Olympus VT1621-01 User Manual download pdf (Page 77)

75

5

1

Set the mode dial to S (Shutter

priority mode).

2

Turn the main dial or sub dial as

shown in the illustration to select a

shutter speed.

For every movement of the dial, the

shutter speed is changed in 1/3 step

increments. You can select a shutter speed

within the range 1/640~2 sec. The

selected shutter speed is displayed in the

viewfinder and control panel.

The aperture value blinks if the camera

cannot set the required aperture size.

Aperture value is blinking, and the

value is at the maximum?

The scene is too bright—the camera

cannot make the aperture small enough to

expose the shot. Correct the problem by

setting a faster shutter speed. If the

indication continues to blink, reduce the

ISO setting or use a neutral density filter.

Aperture value is blinking, and the

value is at the minimum?

The scene is too dark—the camera cannot

open the aperture wide enough to expose

the shot. Correct the problem by selecting

a slower shutter speed. If the indication

continues to blink, raise the ISO setting or

use the flash.

3

Take the picture.

Slow Fast

ON

OFF

2

2

1

Slow

Fast

Viewfinder

Shutter speed

Shutter speeds of less than 1

second are displayed only with the

denominator of the speed setting.

For example, the 1/200 sec.

selection is displayed as 200.

Shutter speeds of more than 1

second are displayed with a double-

quote mark ". For example, the 2

sec. selection is displayed as 2".

Control panel

1 ... 76 77 78 ... 202

Comments to this Manuals

No comments